BLACK SERIES BILLET BUTTON-22mm-BOOT/TRUNK-BWASWBS22BT
Our black series mid-size of 22mm dual colour buttons with illuminating led ring switches are the classy way to go when you're wiring up your power windows in your Hot Rod, Streetcar or Race Car.
These black series buttons have etched engraved logos or scripts in the center of the button to identify what you are switching On or Off.
Each switch offers solid positive tactile feedback and even LED illumination.
Ideal for thermo fans, fuel pumps, water pumps, power windows, power door locks, power trunks, sunroofs, linear actuators, air bags, or anything you can think of that needs a switch.
These handsome & elegant black switches feature a sharp billet finish and high-quality L.E.D. illumination.
Illumination led can be wired so that it is active when turned on with your key ignition, as the button is momentary pushed this sends out a low voltage negative trigger to your hi-amp relays (relays not included).
All BWA buttons have Led's with twin colour fitted into each switch, all twin colours are: Blue/Green - Red/Yellow - White/Orange or Red/Blue, they are polarity sensitive led's so you can change the colour by swapping the positive & negative wires on the led pins, (no harm will be done to the led)
Our buttons are dust proof & water splash resistant so can be used in off road 4x4 use & marine use eg: Boats & Jet Skis
Used For :: Boot Release
Series :: Black Series
Engraved Logo :: Boot/Trunk
Engraved Written Script :: Nill
Thread Diameter :: 22mm
Face size :: 25mm
Length size :: 35.8mm
Switch rating :: 5A/250VAC
Contact Configuration :: 1NO 1NC
Operation Type :: Momentary
Front Shape :: Flat
Lamp Type :: Ring Illuminated LED
Lamp Colour :: Blue/Green/White/Orange
Fitting Washer :: Rubber Seal
Material :: Anodised Aluminium
Part No :: BWASWBS22BT
Plug Harness :: Not Included
These black series buttons have etched engraved logos or scripts in the center of the button to identify what you are switching On or Off.
Each switch offers solid positive tactile feedback and even LED illumination.
Ideal for thermo fans, fuel pumps, water pumps, power windows, power door locks, power trunks, sunroofs, linear actuators, air bags, or anything you can think of that needs a switch.
These handsome & elegant black switches feature a sharp billet finish and high-quality L.E.D. illumination.
Illumination led can be wired so that it is active when turned on with your key ignition, as the button is momentary pushed this sends out a low voltage negative trigger to your hi-amp relays (relays not included).
All BWA buttons have Led's with twin colour fitted into each switch, all twin colours are: Blue/Green - Red/Yellow - White/Orange or Red/Blue, they are polarity sensitive led's so you can change the colour by swapping the positive & negative wires on the led pins, (no harm will be done to the led)
Our buttons are dust proof & water splash resistant so can be used in off road 4x4 use & marine use eg: Boats & Jet Skis
Used For :: Boot Release
Series :: Black Series
Engraved Logo :: Boot/Trunk
Engraved Written Script :: Nill
Thread Diameter :: 22mm
Face size :: 25mm
Length size :: 35.8mm
Switch rating :: 5A/250VAC
Contact Configuration :: 1NO 1NC
Operation Type :: Momentary
Front Shape :: Flat
Lamp Type :: Ring Illuminated LED
Lamp Colour :: Blue/Green/White/Orange
Fitting Washer :: Rubber Seal
Material :: Anodised Aluminium
Part No :: BWASWBS22BT
Plug Harness :: Not Included
Our brands
