HOLDEN HT HG KINGSWOOD 1969-1971 CLASSIC UPDATE WIRE HARNESS

BLUEWIRE AUTOMOTIVE

$2,200.00 
SKU: BWAGMHGHTMC

PLEASE NOTE :: Due to the high demand, we have extended lead times approximately 4 to 8 weeks, and orders will not ship until all components have been completed in manufacturing. If your order is time-sensitive, please reach out to our sales team to verify inventory availability before placing an order.

Now available are our Brand New Holden HT HG Kingswood classic update series plug & play wire system for 6 cylinder or V8 engines.

Features an easy to install design and allow for expandability for future growth & all our wiring systems use only the highest quality wire and parts resulting in the ultimate Holden Ht & HG wiring harness.

The new fuse box is designed to fit in original location with no modifications. All required hardware supplied. New ATO fuse panel allows for easy fuse accessibility.

Harness is laid out and formed to allow for nearly all after market accessories such as: gauge packages, wiper systems, heat and air conditioning systems, etc.

Single Headlight for 7"inch Low Beam & High Beam headlight setup

 

Engine: 186, 202, 308, 350
Transmission: Manual or Automatic
 
For Body style
4-door Sedan
4-door Station Wagon
2-door utility
2-door panel van

Fuse Box is new state of the art factory mounted means there is no need to drill holes, now solid mounted with current blade fuses with a protection cap. This fuse box is flush up with the dash so it is not seen keeping the classic look.
 
Standard turn signal flashers are mounted on fuse panel.
 
A new horn relay is mounted on the main dash harness.

Steering column connectors can plug directly into stock 1969 to 1971 Holden columns that use stock GM turn signal switches also includes reverse light column connection.

Complete factory heater & switch harness assembly included.

Instrument Cluster wiring is designed with a “cluster harness disconnect” system for easy service and assembly. Original terminals and PC board connector are provided for stock cluster connections. The system will also connect into most popular aftermarket gauges such as AUTOMETER, CLASSIC INSTRUMENTS, DAKOTA DIGITAL, STEWART WARNER, VDO and others.

Rear body harness assembly plugs into the main harness in the stock location, and our longer leads allow for stock or custom routing of the wires. Rear body wiring includes complete backup light leads with correct lamp sockets, complete stop and taillight leads with correct lamp sockets, complete turn signal leads with correct lamp sockets, complete license plate light connection to plug into your lamps, and fuel tank sender wire with boot grommet and fuel tank connection. Also in the kit is a boot light set up with switch.

New floor dimmer switch is provided for ease of installation. Wire length and connection accommodate original floor mount dimmer switch.

GM bulkhead connectors for the engine and front light wiring are included and allow for easy installation with original or custom routing.

Engine wiring includes connectors for original points type as well as H.E.I. distributors. Power protected at the starter motor by an 80amp fusible link also complete with positive to Coil, Tacho, Starter Motor Trigger, Water Temp, Oil Pressure and Heater Box wiring.
 
Alternator connectors are supplied for GMH external regulated alternators. GMH “CS” series alternator adapter plugs are available separately. Power to the alternator not included, please see our selection of HK HT HG battery cable.

Front lighting includes extra-long leads that can be routed for stock, or optional appearances. All single headlight connectors and terminals, parking and directional light leads and lamp sockets, and side marker leads and lamp sockets are provided.
 
Window Wiper plug & wiring includes Low/High speed and water spray at the factory wiper itself, if you're running a side GMH washer container that fits to the side of the engine bay this is also wired in the harness as a extra plug. 
 
 
HARNESS AVALIBLE FOR STANDARD HOLDEN HT HG KINGSWOOD
 
1. MANUAL COLUMN SHIFT- HT HG SEDAN WIRE HARNESS,
    Part No: BWAGMHGHTMC
 
2. MANUAL FLOOR SHIFT- HT HG SEDAN WIRE HARNESS
    Part No: BWAGMHGHTMF
 
3. AUTOMATIC COLUMN SHIFT- HT HG SEDAN WIRE HARNESS,
    Part No: BWAGMHGHTAC
 
4. AUTOMATIC FLOOR SHIFT- HT HG SEDAN WIRE HARNESS,
    Part No: BWAGMHGHTAF
 
ATT:: Battery Cables Not Included
 
 



ATT: THE PRODUCT IS A NON-GENUINE COMPATIBLE PART BUT AN AFTERMARKET ACCESSORIES & CAN BE FITTED BY ANYONE WITH EASY FITTING INSTRUCTIONS, BUT BEST IS FITTED BY A PROFESSIONAL AUTO ELECTRICIAN.

PLEASE NOTE :: Due to the high demand we have extended lead times approximately 4 to 6 weeks, and orders will not ship until all components have been completed in manufacturing. If your order is time-sensitive, please reach out to our sales team to verify inventory availability before placing an order.
 

 

Our brands