BOOT/TRUNK RELEASE SOLENOID KIT - 15lbs

BOOT/TRUNK RELEASE SOLENOID KIT - 15lbs

Convert your manual boot release to electric release with this kit.

This Boot Release Solenoid Kit installs into your boot or hatch lock so that unlocking simply involves pressing a button! 

Those technically minded should be able to connect this to any car alarm system that support automatic boot functions. 

Interfaces with existing latch or release cable to provide power trunk/hatch/door release by switch or remote control.
 
Will pull approx 15Lb. Comes with mounting bracket, Solenoid kit and In Dash Button.
 
Control from push button supplied or connect to suitable alarm system.
 
If you want to connect this to a 3rd channel (auxiliary) output on an alarm then you will also need an additional 5 pin relay.
 
The solenoid only needs 2 wires to work; earth and positive trigger wire.
 
Can be fitted to any vehicle that requires a key or manual lever to "pop" boot open, and you can fit the solenoid & attach the lever to the latch.
 
This Solenoid comes with
    Mounting brackets
    Wiring loom with fuse included
    Dash mount push-button switch
    Installation instructions

     

    Features
    Heavy duty power solenoid
    11 pound (rated pull) solenoid motor,
    Push button" (momentary) switch
    Wiring harness
    Solenoid :: 15lbs

    Length :: 4.75”
    Width :: 1.5”
    Bracket :: 2.75”
    Cable :: 17"



    Works With Any Alarm For Remote Operation

     

    This Boot Release Solenoid Kit can be added to any Bluewire Automotive remote system eg: Spacekey Systems & Powerlock Keyless Remote Systems

    - Solenoid Unit ; 95(L) x 43(D) x 58(H)mm
    - Switch: 50 (H) x 44(W) x 40(D)mm.
     
    ATT: THIS SYSTEM MUST BE FITTED BY A PROFESSIONAL AUTO ELECTRICIAN