The Power Locking Kit is the latest technology from Bluewire Automotive which now has more power than from other power locking kits,
These are hardworking Locking Motors and are great for operating older/classic cars.
This kit uses negative lock and unlock signals from a remote alarms/immobilisers to mechanically operated the lock mechanism of a car door.
Lock and unlock left front door by operation by right front door.
Operation of Master and slave actuators
Each kit uses a master actuator for Right front door, and a slave actuator for the front left (2 in total).
Master actuator control all actuators.
Full complement of hardware: 1 x Master 8kg Black power Motor 1 x Slave 8kg Black power Motor 2 x Metal brackets 2 x 3-point fixing clamps slot/cross screws, 2 x Rods 2 x Speed nuts 1 x Switch Controller Module 1 x Full Wiring Harness
Part No :: BWACL02
ATT: Remote Controls are not supplied in this kit but can be added to this system.
Operating voltage: +9VDC to +15VDC
Operating temperature -20 degrees to +85 degrees for equipment designed to be installed within vehicle cabin.
Polarity protection The system circuitry is design to protect itself against accidental battery polarity reversal. This can happen when replacing the vehicle battery.
Short circuit protection The power supply wire to the system is protected against an internal fault within the system.
Current rating All relays rated to carry 15amps continuous, connector 8amps continuous
LOCKING PULL POWER. 8kg
We fit this model Power Locking kits to many Pre 1970 cars as we know our kits are set up with strong motors for heavy locking rods eg: FJ Holden, 1954 Willys Sedan