Our brand new Sharp Series of automotive plug & play replacement led lights are our new rage of diecast aluminium heat resistant led light for your tail light signal and indicator signals.
Our low power consumption led lights come in three colours White, Amber & Red although can be fitted in a colour plastic lens to give back the colour the lens had when new.
This led model BWASP-BAY15D-R is a Park & Brake led globe, to work on a low voltage brightness when driving at night until brake is depressed on the led will work on a high brightness for a stop signal.
No resistor's needed to be installed with the led globes but a electronic flasher relay will be needed for your turn indicator signals & warning hazard signals.
Water Proof & Dust Proof Heat resistant base Extremely long lasting life Ultra bright / Triple the amount of brightness
Light Base:: BAY15D
Material :: Diecast Aluminium
Needle :: 1.2nnpn
Power Consumption :: Low
No Pins:: 2
Colour:: Red Low - Red High Light used for:: Park & Stop Brake Light operation
Voltage： 9V - 30V DC Power： 40W Lumens： 480LM Beam Angle： 360 Dimmable： NO Part No: BWASP-BAY15D-R
Remove your cars plastic light lens then push & twist to remove original bulb.
Make sure the inside pin terminals are clean with no weather residue.
Choose appropriate BA15S or BAY15D base led globe.
Make sure you use gloves or cloth to hold the led globes in position (Make sure the led is clean & no grease or oil on the alloy cover)
Install led light just as ordinary light bulb by push & twist to lock in.
Replace your cars plastic lens (Make sure you give the inside lens a good clean before fitment for better light results)